Axial fan is commonly used as a fan and mining enterprises, it is different from the general fan motor and fan it in a cylinder, the shape is a cylinder, for local ventilation, easy installation, ventilation effect is obvious , safe, hairdryer lookout can take to a designated area. When using axial fans have a lot of caveats, here we come to talk about the specific contents: 1, note that the fan operating environment, each part can have very signs, such as exhaust gas temperature, oil level, electrical control circuit and so, if there are very clear signs should stop immediately confiscated. Credentials workload changes at any time to adjust the amount of wind, so you can make the most fans in good running condition, axial fan bearing temperature during operation shall not exceed 40 ℃, surface temperature not higher than 80 ℃. Regularly check the oil level. Fans should not be cited in the exhaust temperature is higher than 200 ℃ operating environment, the exhaust temperature is too high extinguishing system should be adjusted to the boiler. 2, in the open, stop signs and abnormal operation should be found immediately stopped and checked and found that failure promptly removed, prohibited the operation of the fan in the fan conduct examination and repair. 3, in order to ensure the normal use of axial fans, and to periodically clear the fan inside the dust and debris attached to the recommended 4-6 months a smooth exchange of oil, each overhaul inspection must also exchange once, the oil level should be kept at a predetermined height, so that use of the process will avoid a lot of things happen. Shanxi fans, Taiyuan, fans, blowers manufacturers, axial fans, fans 

palabras clave: Shanxi fans, Taiyuan fans, axial fans,